The following is a brief talk about some of the use of slitting machine knowledge

Let's briefly talk about some usage knowledge of slitting machine . How to solve the different problems of material storage of

slitting machine?

The tension point of the tension equipment of the slitting machine is uneven. Tension is the key to tightness. If the tension is large, the outer diameter of the coil is small. If the tension is small, the outer diameter will be large. The outer diameter affects the winding speed. Then, do you know how to solve the problem of different stocks of the slitting machine? The thickness of the data sheet in the

slitting machine is different. Thick rolling requires a lot of force, resulting in a larger outer diameter. Under the same circumferential speed, the larger the outer diameter, the less material retained. The smaller the outer diameter, the slower the speed, and the rationality of the slitting machine tool design determines its service life, it determines whether it can show good stability and excellent controllability in harsh environments. In terms of manufacturing and assembly technology, the entire manufacturing process implemented by the designer is a systematic project. Manufacturing and assembly technology determines the static geometric accuracy and dynamic accuracy of the machine tool terminal, which is more important for CNC machine tools.

slitting machine CNC pentahedral machining center is an ideal choice for machining box parts and complex parts with cavities, but it has strict requirements on the accuracy of new machine tools. At the same time, the accuracy index of new machine tools installed by users on site is difficult to keep consistent with the accuracy of factory pre-acceptance.

Slitting machine is a mechanical equipment that cuts wide paper or film into narrow materials. It is often used in papermaking machinery, mica tapes for wires and cables, and printing and packaging machinery. Due to the different materials stored in the slitting machine, All of us should follow the above solutions to solve our mechanical problems.

Slitting machine Precautions for metal debugging

1. Before starting debugging, the staff also need to be familiar with and understand the specific operation process, and strictly abide by the specific requirements of operation, which includes that the operator should have relevant qualifications and work experience, and wear appropriate protective equipment to ensure the safety of operating the metal slitting machine.

2. Next, the staff also need to carefully check whether all the wiring connections are normal. After confirmation, the metal slitting machine should be powered on. Remember, after powering on, do not open the electric control door at will, and do not touch the electrical parts with your hands to avoid electric shock.

3. During the entire operation process, the staff must concentrate on operating the metal slitting machine in strict accordance with the requirements, especially when feeding, be sure to pay attention to the coordination of the strength and the fixed position of the feeding, so as not to hurt the feet when the raw materials fall.

4. During the trial operation of the metal slitting machine equipment, the staff should pay attention to the operating status of the equipment to ensure that the position of the metal material on the uncoiler is accurate. When observing the operation of the equipment, they should keep a proper distance from the equipment and pay attention to safety.

5. After the test run is confirmed to be in good condition, it can be put into formal operation.

Well, the editor will not explain much. Thank you for watching. Let's see you next time. 29