Precautions for the operation of the slitting machine

operation of the slitting machine?

stripper is a tape processing tool, mainly used to cut the tape into a specific size, it can be used to separate the tape according to any adjustment scale, and has met the requirements of other tape production, then about the slitting machine What do you know about the precautions for operation?

The precautions in the operation of the slitting machine are as follows:

1. Before using the slitting machine, check whether each station is adjusted well. If the parts need to be lubricated, fill up the lubricating oil in advance and stick to whether the cutting tool is sharp.

2. Before the slitting machine works, check whether the machine is abnormal or not, and enter the order to be processed into the computer in advance for order checking.

3. Before starting the slitting machine, make sure that there are no other people around to prevent the operator from accidentally hurting others.

4. Before starting the machine, ensure that the voltage, current and hydraulic pressure are normal so that the equipment can work safely.

5. During the operation of the slitting machine, please be careful not to touch the film roll or roll core with your hands to avoid personal injury.

6. When operating the divider, please be careful not to scratch with a knife or hard object, and do not cut off each drum core.

7. After the slitting machine is put into operation, the better working condition of the equipment should be adjusted in time according to the production situation. The indentation of the slitting machine should be appropriate without separation, and the trimming positions on both sides should be appropriate.

When we operate the slitting machine, we should all follow the above precautions. What is the daily maintenance of

slitting machine?

During the use of the slitting machine, it is necessary to often add special lubricating oil to lubricate related parts. This is the same as the working principle of mechanical equipment such as automobiles. Then, do you know the daily maintenance of the slitting machine?

Daily maintenance of slitting machine :

1. Scrub (no dust on the pinch roll, winding shaft and winding material).

2. Pay attention to power off when not needed, 3 screws and wounds should be oiled frequently to prevent rust. Common problems of

slitting machine:

1. When disassembling and changing specifications, the working pressure of the upper knife must be returned to open the upper knife seat, otherwise the knife head will be damaged and antirust oil or engine oil will be applied when not in use for a long time.

2. The divided raw materials are limited to paper products, a large number of dragon products, PC,PVC,ABS, with a thickness of less than 250#, and cannot be used to separate hard raw materials such as metal materials.

For many products, the slitting machine is the required equipment. Without its help, our production process will be greatly affected. When we maintain the slitting machine, we need to follow the above maintenance methods. Maintain our machinery.

Okay, the editor will not do too much explanation. After reading the article, if you have any questions or needs, you can contact our company at any time.