Welcome to our website

中文简体 | English

Hongtu Packaging Machinery

东莞市宏途包装机械有限公司

Dongguan macro way packaging machinery co., LTD.

Service Hotline

Service Hotline:

+86-135 8076 2135

NEWS

Company News

Industry Dynamics

Jun 29,2021

The difference between the front and rear feeding of the tape slitting machine

The tape slitting machine is a tape processing tool used to cut tape according to a specific size. With it, we can cut the tape according to any adjustment ratio. Therefore, everyone knows what is the difference between pre-feeding and post-feeding of the tape slitting machine? 1. Braking method: adjustable pneumatic brake (electromagnetic brake is optional) 2. Noise reduction method: automatic pneumatic wheel 3. Two main drive shafts are used for film transmission, and there are flattening bars for anti-wrinkle treatment 4. Rewinding is the sliding shaft of the double tension control tape slitting machine

The difference between the front and rear feeding of the tape slitting machine

Jun 29,2021

Application and characteristic analysis of automatic table cutting

The main purpose of the automatic cutting table is to cut the transparent adhesive tape, non-dry adhesive tape, plastic film, paper roll and other materials at a fixed length, and cut the whole roll of wide material into small rolls through the set width. For example, the commonly used transparent glue is cut through the equipment. The width of the cut can be set on the man-machine interface. In the man-machine interface to establish a variety of forms of work, each form includes: set the width, the number of cutting knife two parameters. For example, if the customer selects form 1, the system will automatically cut according to the width set in form 1 after operation, and automatically stop when the number of cut knives reaches the set number of knives. If you choose

Application and characteristic analysis of automatic table cutting

Jun 29,2021

How to Improve the Work Efficiency of Single Shaft Cutter

1, the slitting machine to the whole roll of raw materials for fixed length slitting processing, such as plastic packaging materials, packaging paper, film, leather and other slitting processing, all need to use fixed length slitting control. 2. Fixed-length slitting control is divided into static and dynamic slitting: stop accurately when the set length arrives, then static slitting processing, and restart operation after slitting; When the set length arrives, the slitting signal is sent out without stopping, and the slitting machine dynamically slitting and processing during material movement. 3. The important performance index of fixed-length slitting is slitting accuracy and good consistency of finished product length. 4. The slitting length can be set continuously

How to Improve the Work Efficiency of Single Shaft Cutter
< 123456 > proceed page